Messages

1

Other (Public) / Re: Pulse charger...

« on: November 11, 2017, 01:56:24 PM »

This schematic should fulfill all listed must haves.
CD4060 with potentiometer will provide frequency range from 760Hz to 3.5kHz.
Switch provides selection of duty cycle from 50%, 25%, 12.5%, 6.25%, 3.125% and 1.5625%.
IC3 with two transistors make driver for MOSFET.
Entire device get current from AC line thru C2/D1-2 and power for spikes goes form rectified power AC line.
This should provide powerful and stable 250-300V spikes.

Sounds like a challenge to me.  Seriously though, thanks for the infol. I'd love to make my own pulse charger.